Voodoo Products

Voodoo Scooter Parts LLC

Click the video player below to see all of the adapters in action

*** All items below will work on any 2006 and newer Genuine Buddy Scooter ***
(Except as noted)

   .................................................................................................................................................
- Running Light Adapter -   $25.00

    Converts the unused deadlights into full time running lights.

    The running lights stay on when the upper blinkers flash.

Installation video for the Running Light Adapter

- Blinker Adapters - $35.00

Converts to unused deadlights into additional blinkers.

When the upper blinkers are activated, the lower blinkers flash with them.

Installation video for the Blinker Adapters

        (Best of Both)

Converts the unused deadlights into Running Lights and Blinkers

The running lights are on until a blinker is turned on. Once the upper blinker is activated,
that blinker and the corresponding running light flash in an alternating pattern.

Installation video for the BOB Combo Adapter

$110.00
(Includes BOB Combo Adapter, Blinker Adapters and Universal Flasher Relay)

Converts the upper and lower lights into running lights and blinkers.

When a blinker is activated, both the upper and lower lights flash together.
Once this package is installed, all four lights will be on at the same time.
Note: You must replace the deadlights and DOT blinkers with LED bulbs before
installing this package. Failure to do so will damage the adapter and drain your battery.
LED bulbs are not included.

Installation video for the Voodoo Combo Package

$90.00
    (Includes BOB Combo Adapter, Front to Rear Extensions, Universal Flasher Relay)

    Converts the rear blinkers to running lights and blinkers.

    Once installed, the rear blinkers will function as both running lights and blinkers.
    All of the other lights remain unchanged.

Installation video for the Rear Running Light Package

- Front and Rear Running Light Package option #1 - $120.00
(Includes BOB Combo Adapter, Running Light Adapter, Power Splitter,
Front to Rear Extensions, Universal Flasher Relay)

Converts the deadlights into full time running lights and the rear blinkers
into running lights and blinkers. The DOT blinkers remain the same.

Once installed, the deadlights function as full time running lights while the rear blinkers function as both running lights and blinkers
giving you increased visibility all around.

Note: You must replace the deadlights and rear blinkers with LED bulbs before
installing this package. Failure to do so will drain your battery.
LED bulbs are not included.

- Front and Rear Running Light Package option #2 - $125
(Includes BOB Combo Adapter, Front to Rear Extensions, Universal Flasher Relay, Blinker Adapters)

Converts the rear blinkers as well as the front deadlights to running lights and blinkers.

Once installed, the rear blinkers and front deadlights will function as both running lights
and blinkers giving you increased visibility all around. The front deadlights and upper
DOT blinkers will flash in an alternating pattern.

Note: You must replace the deadlights and rear blinkers with LED bulbs before installing
this package. Failure to do so will damage the adapter and drain your battery.
LED bulbs are not included.

Installation video for the Front and Rear Running Light Package

Type

- Optional On/Off Switch - $10.00
Wire tap switch:
-The switch will not work unless the key in your ignition is turned to “ON”.
This eliminates the possibility of leaving the lights on.
-You can use either the stock bulbs or aftermarket LED bulbs.
12V accessory outlet switch:
-Anytime the switch is "ON", your running lights will be on (even with the ignition "OFF")
-Forgetting to turn the switch off could result in a dead battery.
-This set-up requires swapping the stock bulbs with LED’s or they will blow the 1A fuse.
-With the switch turned on, you risk blowing the 1A fuse if you use the 12V outlet.

Installation video for the Optional On/Off Switch

$15.00

These are the extensions used in the Rear Running Light packages.
If you already own the BOB Combo Adapter (or Voodoo Combo Package)
and want to convert the rear blinkers to running lights/blinkers,
you will need these extensions.

Note: A Universal Flasher Relay is needed if converting the rear blinkers to LED running lights/blinkers.

Installation video for the Front to Rear Running Light Extensions

    - LED Voltage Regulators -    $20.00 per set

    Protects aftermarket LED bulbs from damage caused by over voltage.
   With these regulators installed your bulbs will never be subjected
to more than 12volts.

    Sold in sets of two.

  View installation photos here

$35.00

    Demand attention from drivers behind you by installing this brake light modulator.
    Your brakes will rapidly flash four times, flash slightly slower another four times,
and then stay solid as long as you hold the brake lever. The series of flashes
will epeat once the brakes are released and applied again.

  Note: This modulator can only be used on LED tail/brake lights (Buddy's 2007 and newer).
    It will not work on the 2006 Buddy.

Installation video for the Flashing Brake Light Modulator

Click the video player to view the modulator in action

    A universal flasher relay is needed if you plan to swap out the rear blinkers or the front
    upper blinkers with LED bulbs. If you use the stock relay with LED bulbs,
your blinkers will flash at a very fast rate (or they won't flash at all).
This relay uses the same connector as the stock relay and will mount in the stock location.
Works with any combination of incandescent and LED bulbs.

    Note: This relay emits a very quite audible reminder (the "click, click" sound).
    It cannot be heard while the scooter is running.

Installation video for the Universal Flasher Relay

***   ***   *** All items below work on the Genuine Blur ***   ***   ***




   ..............................................................................................................................................
- Running Light Adapter -   $25.00

    Converts the unused deadlights into full time running lights.

    The running lights stay on when the upper blinkers flash.

             Installation video for the Running Light Adapter



- Blinker Adapters -    $35.00

    Converts to unused deadlights into additional blinkers.

    When the upper blinkers are activated, the lower blinkers flash with them.

Installation video for the Blinker Adapters


- BOB Combo Adapter -    $55.00

(Best of Both)

    Converts the unused deadlights into Running Lights and Blinkers

    The running lights are on until a blinker is turned on. Once the upper blinker is activated,
    that blinker and the corresponding running light flash in an alternating pattern.

Installation video for the BOB Combo Adapter


- Voodoo Combo Package -
$110.00
    (Includes BOB Combo Adapter, Blinker Adapters and Universal Flasher Relay)

    Converts the upper and lower lights into running lights and blinkers.

    When a blinker is activated, both the upper and lower lights flash together.
    Once this package is installed, all four lights will be on at the same time.
    Note: You must replace the deadlights and DOT blinkers with LED bulbs before
    installing this package.  Failure to do so will damage the adapter and drain your battery.
    LED bulbs are not included.

Installation video for the Voodoo Combo Package

- LED Voltage Regulators -    $20.00 per set


    Protects aftermarket LED bulbs from damage caused by over voltage.
   With these regulators installed your bulbs will never be subjected
to more than 12volts.

    Sold in sets of two.

View installation photos here



- Universal Flasher Relay -    $20.00

    A universal flasher relay is needed if you plan to swap out the rear blinkers or the front
    upper blinkers with LED bulbs. If you use the stock relay with LED bulbs,
your blinkers will flash at a very fast rate (or they won't flash at all).
This relay uses the same connector as the stock relay and will mount in the stock location.
Works with any combination of incandescent and LED bulbs.

    Note: This relay emits a very quite audible reminder (the "click, click" sound).
    It cannot be heard while the scooter is running.

Installation video for the Universal Flasher Relay

For dealer inquiries, please click on the "Contact Us" link at the top of the page.

	.............................................................................................................................................. - Running Light Adapter - $25.00 Converts the unused deadlights into full time running lights. The running lights stay on when the upper blinkers flash. Installation video for the Running Light Adapter
	- Blinker Adapters - $35.00 Converts to unused deadlights into additional blinkers. When the upper blinkers are activated, the lower blinkers flash with them. Installation video for the Blinker Adapters
	- BOB Combo Adapter - $55.00 (Best of Both) Converts the unused deadlights into Running Lights and Blinkers The running lights are on until a blinker is turned on. Once the upper blinker is activated, that blinker and the corresponding running light flash in an alternating pattern. Installation video for the BOB Combo Adapter
	- Voodoo Combo Package - $110.00 (Includes BOB Combo Adapter, Blinker Adapters and Universal Flasher Relay) Converts the upper and lower lights into running lights and blinkers. When a blinker is activated, both the upper and lower lights flash together. Once this package is installed, all four lights will be on at the same time. Note: You must replace the deadlights and DOT blinkers with LED bulbs before installing this package. Failure to do so will damage the adapter and drain your battery. LED bulbs are not included. Installation video for the Voodoo Combo Package
	- LED Voltage Regulators - $20.00 per set Protects aftermarket LED bulbs from damage caused by over voltage. With these regulators installed your bulbs will never be subjected to more than 12volts. Sold in sets of two. View installation photos here
	- Universal Flasher Relay - $20.00 A universal flasher relay is needed if you plan to swap out the rear blinkers or the front upper blinkers with LED bulbs. If you use the stock relay with LED bulbs, your blinkers will flash at a very fast rate (or they won't flash at all). This relay uses the same connector as the stock relay and will mount in the stock location. Works with any combination of incandescent and LED bulbs. Note: This relay emits a very quite audible reminder (the "click, click" sound). It cannot be heard while the scooter is running. Installation video for the Universal Flasher Relay